Embedded Files
CURRENT LEAD TIME: 2 - 4 weeks
TillerBuddy Horn Installation Guide
Every Tiller Should Have a Buddy by its Side (Made by a Boater for the Boater)
The TillerBuddy Horn is a simple, plug-and-play, rechargeable accessory designed to work wirelessly with any TillerBuddy Receiver Module (V1, V2, or V3).
Required Tools
None (Standard screw/bolt for mounting horn unit).
Safety First
Ensure the unit is charged before initial use.
Step 1: Mounting and Charging
Securely mount the TillerBuddy Horn unit in the desired location (e.g., cabin roof, engine room).
Ensure the unit is charged via the supplied charging cable.
Note: The TillerBuddy Horn is pre-programmed to work with your existing TillerBuddy Receiver. The unit remains in standby 24/7, ready for immediate activation.
Step 2: Pairing (Only if needed)
The unit is plug-and-play. If the horn does not sound when activated by your Buddy controller:
Simultaneously press and hold the Pair button on the side of the TillerBuddy Horn unit and the Pair button on the TillerBuddy Receiver Module.
Hold both buttons for 5 seconds. Pairing will commence automatically.
⚙️ TillerBuddy Horn Support & Contact
As a Boaty Buoy Boats product, the TillerBuddy is hand-crafted and tested for reliability. Should you encounter any issues, please check the points below or contact us directly.
Troubleshooting
Symptom: Horn does not sound.
Solution: Check the battery charge level on the TillerBuddy Horn unit. Re-try the pairing sequence in Step 2.
Symptom: Horn sounds intermittently.
Solution: Ensure both the TillerBuddy Horn and the Buddy controller are fully charged.
Contact & Warranty
For technical assistance, service information, or warranty claims, please contact Benjamin Donnaghue ("BoatyBuoyBen") directly.
Email: tillerbuddy@boatybuoy.boats
Phone: 07555252025
Website: www.tillerbuddy.co.uk
Note: We also offer boat electrical services and PAT testing via www.boatybuoy.boats, provided in person along the canal network or through online consultancy.
Google Sites
Report abuse